Swastik Fire Protection

Features:
• Low profile design
• Low current draw
• Backward compatible with Series 100 detector range of bases
• Wide operating voltage 8 to 30VDC
• Bi-colour LED detector status indicator• Automatic drift compensation
• Range of detector bases available
• Tested and approved to EN54 – 7:2000 (Amendment 1)

Features

• Dual LED’s for 360 visibility.
• Advanced detection and communication protocol.
• Easy installation and maintenance.
• Sleek low -profile housing design.
• Regular 100mm Base.
• EN-54 Standard.

Features:
• Sleek, low-profile design.
• Addressable-analog communication.
• Stable communication technique with noise immunity.
• Low standby current.
• Two-wire SLC connection.
• Compatible with FlashScan® and CLIP protocol systems.
• Rotary, decimal addressing (1-99 on CLIP systems, 1-159 on FlashScan systems).
• Optional remote, single-gang LED accessory.
• Dual LED design provides 360° viewing angle.
• Visible bi-color LEDs blink green every time the detector is addressed, and illuminate steady red on alarm (FlashScan systems only).
• Remote test feature from the panel.
• Walk  test with address display (an address on 121 will blink the detector LED: 12-[pause]-1(FlashScan systemsonly).
• Built-in functional test switch activated by  external magnet.
• Built-in tamper-resistant feature.
• Sealed against back pressure.
• Constructed of off-white fire-resistant        plastic, designed to commercial standards,    and offers an attractive appearance.
• 94-5V plastic flammability rating.
• SEMS screws for wiring of the separate    base.
• Optional relay, isolator, and sounder bases.

Product Details:-

• This detector has an inbuilt smoke sensor to detect fire. The device can be installed on the ceiling with the help of screws. The detector adopts the special structure with dustproof & mothproof design.The detector is suitable to detect smoke in a house, shop, hotel, restaurant, office building, school, bank, library, computer house and storehouse etc.
• Without Battery
• Optical smoke sensor Type
• Multi Sensor Type
• Fire And Smoke Detection Capabilities

The Apollo Smoke Detector is a type of smoke detection device commonly used in fire alarm systems, especially in commercial, industrial, and residential settings. Apollo is a well-known brand that specializes in fire detection and alarm equipment. They offer a wide range of smoke detectors, including both ionization and photoelectric models, as well as combined smoke and heat detectors.
Key Features:

• Advanced Detection Technology: Apollo detectors are designed to offer quick and reliable detection, which helps reduce the risk of false alarms.
• Low Power Consumption: Many Apollo smoke detectors are designed with low power consumption, which helps prolong the life of batteries or reduces the energy load in wired systems.
• Interconnection: In systems where multiple detectors are used, Apollo smoke detectors can be interconnected, meaning that when one detects smoke, others in the system will also trigger an alarm.
• Self-Test and Maintenance Features: Some Apollo models include self-testing capabilities, allowing users to check the functionality of the detectors without manual intervention.

The PSE-AP photoelectric smoke detector has a completely new detection chamber design, the result of many years of research and design Honeywell. This delivers improved responsiveness, reduced sensitivity changes caused by settling dust and reduced false alarms resulting from insect ingress and other debris. The plug-in unit uses sophisticated processing circuitry that incorporates smoothing filters to help eliminate transient environmental noise conditions that can be the cause of unwanted alarms. The devices are managed by embedded software running complex algorithms that further improve resilience to false alarms and improve detection speed.

The Edwards Est SIGA-PHS Intelligent Smoke Detector can give and initiate a smoke detector.  Not only does this detector offer smoke detection, but it also offers heat detection as well. The Signature Series Data Entry Program also uses the mapping feature. With interactive menus and graphic support. Also, the Edwards Est SIGA-PHS intelligent detector constantly runs self-checks to provide important maintenance information. The self-check results are automatically updated and permanently stored in the detector’s non-volatile memory. Besides, this information is accessible for reviewing any time at the control panel, PC, or using the SIGA-PRO Signature Program/Service Tool.

The Signature Series Data Entry Program also uses the mapping feature. With interactive menus and graphic support, the wired circuits between each device can be examined. Layout or “as-built” drawing information showing wire branches. Furthermore, the detector automatically identifies when it is dirty or defective and causes a “dirty detector” message. Also, the detector’s sensitivity measurement can be transmitted to the loop controller.

Features :

• 135°F Fixed Temp
• Twenty pre-alarm sensitivity values, set in 5% increments
• Sensor Range: 0.67 – 3.77% /FT
• Non-volatile memory
• Electronic addressing
• Integral microprocessor – intelligent detector